Wheels

Stainless spoke nipple flat washers from Whisky. - .3mm Thickness

Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap

- Replacement adjustable nut for three-speed internal hubs.

- Replacement steel quick release skewers

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

- Replacement rear skewer - Spacing: 135mm - Material: Steel

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - ISO Diameter: 507 / 24-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Tire Type: Clincher

In the early design phases of our Traverse Fattie 29, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a proper, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.

- Series: SLX - HB-M7000 - Axle Type: QR - Axle Length: 100 - Axle Diameter: 17.5 - HB-M7010 - Axle Type: 15mm E-Thru - Axle Length: 100 - Axle Diameter: 14 - Spoke Holes: 32H - Spoke Hole Circle: 44/44 - Average Weight: 189g

Salsa springs for Flip-Off skewers

The Roval SLX 24 Disc is a no nonsense wheelset. At only around 1515 grams, it's designed for light overall weight, but this doesn't mean that it sacrifices anything to strength or durability. Instead, its 20mm-wide alloy rims work to bolster the aforementioned characteristics, while also providing the optimal tire profile in order to enhance both confidence and feel on the road. Meanwhile, the rims have been built to Roval aero hubs that feature fast-engaging DT 350 star-ratchet internals at the rear. Add it all up, and you get a wheelset that checks all of the boxes for daily training and CX racing—lightweight, stiff, and incredibly reliable.

Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back. - Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve) - Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Features - Strong nylon reinforced material handles high-pressures - Adhesive backed for a secure fit - Does not rot - 0.5mm thick

Aluminum Tubeless Presta Valve - MTB or Road

DT-Swiss Center Lock Adaptor. Allows 6-bolt rotors to be used on Center Lock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - 230mm version accepts all rotors up to 203mm diameter - 160mm version accepts all rotors up to 160mm diameter

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Thread Pitch: 12 x 1.0mm

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.

Stan's Enduro Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!

Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Enduro Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!

Stan's Flow Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping." Plus, you won't miss dealing with flat tires and you'll save money on tubes!