Skip to main content

Filter By:

Seatposts

Sunlite Alloy 350mm Pillar Seatpost
$12.99 - $15.00
- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams
Sunlite Alloy 350mm Seatpost
$20.00 - $23.99
• Forged aluminum • Integrated micro-adjust seat clamp
OneUp Components Dropper Post Remote
$49.00 - $57.00
A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. Kit includes cable and housing Compatible with all cable actuated dropper posts. SPECS Compatibility 22.2mm Bar Clamp - All other groups 10 speed Shimano SRAM Matchmaker X - SRAM MMX clamps Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M7000 only Weight: Remote with 22.2mm Bar Clamp - 46g Remote with SRAM Matchmaker X - 43g Remote with Shimano I-spec-EV - 43g Remote with Shimano I-spec II - 41g INSTALL INSTRUCTIONS 22.2mm Clamp - Loosely attach the hinged clamp to your handlebar (Left side of brake for SRAM, Right side of brake for Shimano) - Attach the remote body to the clamp using your preferred mounting hole. - Torque the remote body to the clamp using a 3mm hex to 3Nm - Loosen the 22.2mm clamp and rotate the OneUp dropper remote until the remote body is parallel to the brake lever - Snug the 22.2mm clamp to 1Nm max. Shimano I-spec II (11speed M9000, M8000, M6000 only) - Remove the lever mounting bolt completely from the left brake using a 4mm hex - Depress the "Push to Open" button using a 2mm hex to fully open the brake lever clamp - Remove the plastic spacer from the inside of the lever clamp - Install the OneUp I-spec II adapter into the lever clamp - Loosely reinstall the brake lever clamp onto the handlebar - Attach the remote body to the I-spec II adapter using your preferred mounting hole. - Torque the remote body to the I-spec II adapter using a 4mm hex to 3Nm - Rotate the OneUp dropper remote until the remote body is parallel to the brake lever. - Torque the brake lever clamp to the manufacturer's recommendation Shimano I-spec EV (12 speed XTR M9100, XT M8100, SLX M7100 only) - Remove the lever mounting bolt completely from the left brake using a 4mm hex - Depress the "Push to Open" button using a 2mm hex to fully open the brake lever clamp - Install the OneUp supplied T-nut into the curved recess on the hinged clamp - Reinstall the brake lever clamp onto the handlebar - Install the OneUp supplied IS-EV adapter onto the T-nut - Attach the remote body to the IS-EV adapter using your preferred mounting hole. - Torque the remote body to the IS-EV adapter using a 4mm hex to 3Nm - Rotate the OneUp dropper remote until the remote body is parallel to the brake lever. - Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm. SRAM Matchmaker X - Remove Brake lever mounting screw and hinged clamp using a T25 Torx - Install the OneUp supplied T-nut into the curved recess on the hinged clamp - Reinstall the brake lever clamp onto the handlebar - Install the OneUp supplied Matchmaker X adapter onto the T-nut - Attach the remote body to the Matchmaker X adapter using your preferred mounting hole. - Torque the remote body to the Matchmaker X adapter using a 4mm hex to 3Nm - Rotate the OneUp dropper remote until the remote body is parallel to the brake lever. - Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.
OneUp Components Dropper Remote Clamp
$20.00
Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Does not contain remote body DROPPER REMOTE CLAMP I-SPEC-II - V2 -Compatible with Shimano I-SPEC-II brakes Not Compatible with Shimano I-SPEC-A or B DROPPER REMOTE CLAMP I-SPEC EV - V2 - Compatible with Shimano I-Spec EV (M9100, M8100, M7100) brake mounts.
Kalloy 602 Seatpost
$18.99 - $20.00
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.
Kalloy Uno Straight Seatpost, 26.0 x 350mm, Silver
$15.00
The Kalloy Uno Seatpost is made out of one-piece forged 6061 aluminum, internally ovalized. One-piece forged 6061 aluminum, internally ovalized.
Giant D-Fuse Zero Offset Seatpost
$81.00
- Giant proprietary D-Fuse seatpost - Composite construction with Alloy clamp - Zero offset configuration - 380mm length
Specialized CG-R Carbon Seatpost
$200.00
The Specialized CG-R seatpost extends the concept that “Smoother is Faster.” This revolutionary post features 18mm of vertical compliance, Zertz vibration damping, and FACT carbon construction. The CG-R delivers unsurpassed comfort, control, and efficiency without adding weight or complication to the frame. No matter what surface your ride takes you on, the CG-R will make it better. - Revolutionary design allows 18mm of vertical compliance. - FACT carbon construction blends durability and comfort. - Vibration-damping Zertz for increased comfort. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt. - Diameter: 27.2mm
Specialized S-Works Carbon Seatpost
$225.00
Light, high-tech and comfortable, Specialized's S-Works Carbon Seatpost will improve your ride. It's built of Specialized's FACT carbon for a feathery weight and impressive strength and durability. Plus, the post features a cylindrical head assembly that's simple to adjust fore/aft and tilt with a single bolt. The S-Works seatpost comes in a 400mm length with zero or 20mm setback, as well as a 350mm length with 20mm setback.
Roval Alpinist Seatpost
$275.00
Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Seatpost the lightest post we've ever seen that passes our standards. At 136 grams (27.2mm x 300mm), it's about as light as you'll find. Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist 2-bolt micro-adjust clamp with extended saddle cradle ensures precision fit and secure retention. Available in two sizes, 27.2mm x 300mm and 27.2mm x 360mm, each with a 12mm setback. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - 136 grams (27.2mm x 300mm), - 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm. - Advanced composite construction delivers light weight and reliability. - Available in two sizes: 27.2mm x 300mm x 12mm offset, 27.2mm x 380mm x 12mm offset - No-Fault crash replacement policy. Lifetime warranty - System Weight Limit: 275lbs / 125kg
Giant Alloy Seatpost
$21.00
Giant's Alloy Seatpost is dependable and respectably light at a great price. It boasts a single bolt micro-adjust clamp so you can dial in a great saddle position.
Giant Aluminum Replacement Seatpost
$14.00
Giant's Aluminum Replacement Seatpost is dependable and respectably light at a great price. It boasts a single bolt micro-adjust clamp so you can dial in your saddle position.
Giant Comfort Suspension Seatpost
$42.00
Let Giant's Comfort Suspension Seatpost take the sting out of cycling. This plush shock-absorbing post mutes road vibration and ensures rider comfort.
Giant Connect Seatpost (Reversible Outer Clamp)
$37.00
Giant's Connect Seatpost is tough and durable thanks to its forged 6061 aluminum construction. The reversible outer clamp design allows for 12mm or 23mm offset options and the extra-long saddle clamp is compatible with lightweight carbon rails.
Giant Contact Switch Dropper Seatposts
$184.00
Features - Anti-Twist Technology keeps the saddle firmly positioned - Steel proprietary air & oil cartridge offers smooth consistent load range adjustment - Internal cable routing - Secure 2-bolt clamp design with steel hardware - Clamp design compatible with standard 7mm (alloy) or 9mm (composite) saddle rails - Extra-long lower saddle rail guide designed to cradle lightweight saddle rails securely - Includes updated 2x remote lever
Giant MY16+ Variant Carbon Seatpost
$184.00
- Giant Variant carbon seatpost - Fits 2016+ TCR Advanced models (non-ISP)
Giant Vector Carbon Seatpost
$184.00
Giant's Vector Seatpost offers superb aerodynamics, low weight, and the vibration damping high-end carbon is known for. The adjustable clamp head can be set up to provide either -5 or 25mm offset without any additional parts or tools.
Page 1 of 1