$37.00 - $65.99
• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels
• Cantilever brake mounts • 45mm rake • Chromoly construction • 1 1/8-inch steerer diameter • Threadless fork
$17.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
Pike Select combines an updated DebonAir air spring with the Charger RC damper, perfect for any trail junket you have planned. As a bonus, we included race-proven Maxima Plush fluid to help reduce friction, silence noise, and keep things running smooth ride after ride. Features: - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper featuring low-speed compression adjust - Maxima Plush damping fluid reduces friction and silences damper noise
$268.00 - $376.00
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look
$1,099.99 - $1,100.00
The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends. - Axle-to-crown: 420mm - Offset: 43 - Steerer: 340mm - Tire Clearance: 71mm (2.8") - Weight: 1190g (2.62 lbs)
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut
The Dinner Fork is non-suspension corrected and accommodates 26", 27.5", and 29" wheel sizes. If you want to run fenders alongside an 8 or 24-Pack style rack, this fork can do that. Hell, it relishes it. To give you even more options for carrying miscellaneous items, we put a set of 3-pack mounts on each fork blade, too. Run it on your current Surly for a thought-provoking new experience, or throw it on a different rig to unlock some off-road capabilities. A truly versatile piece of cutlery, the Dinner Fork features 100% Surly Chromoly steel construction, 51mm IS disc brake mounts, and clearance for tires up to 26 x 3.0", 27.5 x 2.8", or 29 x 2.2". Specifications: - Axle-to-crown: 420mm - Offset: 50mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 26 x 3.0" (without fenders); 27.5 x 2.8" (with or without fenders); or 29 x 2.2" (without fenders) - Weight: 2.75 lb.
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch
Designed for Surly's Krampus frame, this fork has quick-release dropouts spaced at 100mm and clearance for a 3-inch tire on a 50mm rim. To accommodate such big tires it's got a longer axle-to-crown measurement than the Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3" - Weight: 1133g uncut
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 26" has clearance for a 2.1" tire
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 700c has clearance for a 45mm tire
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. Offered in 26? and 700c wheel sizes, the fork’s new crown provides ample clearance for 700c x 50mm tires, and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 700c = 390mm - Offset: 45mm - Steerer: 700c (56–64cm frames) = 350mm - Tire Clearance: 700c x 45mm - Weight: 700c = 2.3 lb uncut
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - Axle-to-crown: 400mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders) - Weight: 1254g
Surly's Moonlander Fork has clearance for a 26 x 4.7-inch wide tire. It accepts specialty front hubs with a rear disc offset or 135mm rear hubs. It takes a front disc-brake adapter so you can run any brakes that come in a traditional front/rear set without having to break up a set. This fork features large-diameter, thin-wall chromoly blades that taper for a smooth and supple ride. And, it's got standard and low-rider rack mounts and comes in a tough powdercoat finish because it's awesome.
The Ogre fork is non-suspension corrected and will run 29-inch as well as 27.5-inch tire options. Made of 4130 CroMoly, it's got 51mm IS disc mounts, removable cantilever pivots, brake-line guides, low-blade threaded barrel bosses and mid-blade eyelets for a rack. This fork is designed to run disc brakes, fenders and a rack simultaneously. It's got two sets of triple bottle mounts, one on each leg. - Axle to Crown Length: 447 mm - Brake Mount: Canti studs, IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Chromoly Steel - Offset: 43 mm - Steerer Type: Straight 1-1/8-inch - Wheel Size: 29-inch, 27.5+ - Powdercoat finish
Surly's Steamroller Fork pairs great handling with urban utility. It has steep track geometry for lightening fast response, making it as at home on the velodrome as it is flying downtown with cars and pedestrians. It features a flat crown, drilled to accept a standard-reach caliper brake, and the use of wide 38mm tires. And its stealthy Black powdercoat means your opponents in the Pursuit race will never see you coming!
The Straggler fork is very much like the Cross-Check fork — it's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets. - Disc or rim brake compatible - Compatible with disc brakes and rack simultaneously - Fits 26-inch wheels with clearance for a 3.0-inch tire - Steerer Type: Straight 1-1/8-inch - Sleek powdercoat finish
Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in "official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - 15mm x 150mm thru-axle - Butted and tapered blades - Barrel bosses at the dropouts and crown - Mid-blade thru-blade eyelets - Triple bottle bosses on both fork legs - Fits tires up to 5.25" wide - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g
$189.99 - $209.99
Darkwave fork comes with the 28mm offset our team loves and backed by an unmatched and legendary 41-Thermal lifetime warranty against bending and breaking. - Legendary lifetime replacement warranty – laboratory tested and team proven - Custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance - Steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race - Slightly longer steerer tube length for use with taller head tubes and Gyro installations - Rust-proofed with with a lightweight coating that provides the best anti-corrosion processing that's offered today - Optimized, 4mm thick dropout shape for grind and peg clearance - 7075-T6 pre-load bolt with 6 and 8mm hex key slots - 41 Thermal Processed: Sunday is the only company to use Odyssey's proven and trusted 41 Thermal heat treating. This formula has been refined and improved since the late 90's. The proven 41 Thermal process allows our products to be lightweight AND strong. It is also backed by a legendary lifetime warranty.
Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g
The Cutthroat carbon fork is full of features, ready for any adventure. - Full Carbon fork, tapered steerer - Fits 29 x 3.0" tires - Three-Pack mounts - Crown light mount - Includes Salsa Deadbolt Ultralight Thru-Axle - Axle to Crown Length: 483mm - Brake Mount (Fork): Flat Mount 160mm - Color: Matte Black - Crown Race: 40mm - Defined Color: Black - Front Axle: 15mm Thru x 110mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6mm - Steerer Type: Tapered - Steerer Tube Length (mm): 350mm - Weight: 730g - Wheel Size: 29" , 29+ - Max Rotor Size (Fork): 180mm - Maximum Tire Clearance (Fork): 77mm
The Firestarter Carbon Fork is Salsa's high-end, rigid bikepacking fork. This sure-tracking platform features a carbon structure and 15mm thru-axle design, and the Three-Pack mounts on the forward portion of each leg allow use of Salsa Anything Cages or extra water bottle cages. - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Weight: 620 g - Wheel Size: 29er, 29+, 700c - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160mm minimum rotor size; 180mm maximum rotor size - Mid-blade mounts for low rider racks - Compatible with wheel sizes: 27.5+, 29", 29+, 700c - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - BOOST 110 x 15mm thru axle included - Front Axle Size: 15 x 135L, TP=1.5, TL=10 - Internal routing for 110 BOOST dynamo hubs
Page 1 of 2 Next page