Other

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10

Everything you need for installing your integrated rear mounted kickstand.

Features
- Includes both M5 and M6 hardware
- See kickstand diagram for proper assembly

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Park your bike with the genuine Fetch+ 2 kickstand hardware.

Features
- Includes M8 mounting bolt
- Powder coated finish for high durability

- Aheadset preload adjusting bolt

- Air valve parts for Fox rear shocks

One rear shock requires 4 bushings

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Service parts for Fox suspension.

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

When it's time to refresh or upgrade your seatpost, Trek Genuine Replacement Parts have you covered.

Features
- Spacers that reduce travel for Bontrager DropLine 31.6mm dropper seatposts
- For riders who need a shorter seatpost or travel for their fit
- Spacers are not 'stackable' to create greater travel reductions
- Not forwards compatible with any generation of Line or Line Elite Dropper posts
- Refer to the Service Manual for assembly & service instructions

Get back on the trail with genuine replacement dropper post parts.

Features
- Not compatible with Line Elite 31.6mm post
- Regular maintenance of the Line Dropper will help maintain performance
- Tighten to 4nm

Rear Shock Mounting Hardware

• Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware)
• Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility
• 1 kit required per eyelet (2 kits required per rear shock)

Original replacement hardware for your e-bike system.

Features
- Refer to the Service Manual for assembly & service instructions
- Hardware not included

Original fender hardware.

Features
- Sold as pairs
- Plastic washer with taper
- 12mm outside diameter

The right parts for the right bike.

Features
- Refer to service manual for assembly instructions and service
- Threadlocker patches and coatings may effect cost versus untreated bolts
- Confirm correct length before ordering, several lengths may be available
- ISO 14581

Original replacement hardware for your bike.

Features
- Threadlocker patches and coatings may effect cost versus untreated bolts
- Confirm correct length before ordering, several lengths may be available
- Do not use on storage door assemblies that may need a longer bolt
- E-bikes with downtube batteries may require a maximum length
- Refer to the Service Manual for assembly & service instructions

Keep your fenders in safe working order with regular service and replacement.

Features
- Bend Locking tab after installation
- Bolts sold separately
- Only assemble with original bolts

Keep your fenders in safe working order with regular service and replacement.

Features
- Fender wire sheath retention
- Fits on the inside of the Trek Allant+ and Diamant Zouma+ rear fender

For proper assembly.

Features
- Spacer height: 10mm
- Contains 1pc
- Compatible with Trek Super Commuter
- Compatible with Diamant Zouma+ 2018 / 2019

For proper assembly.

Features
- Spacer height: 4mm
- Contains 1pc
- Compatible with Trek Super Commuter
- Compatible with Diamant Zouma+ 2018 / 2019

Volume Spacer tuning kits for FOX suspension fork service and repairs.

- Valving parts for Fox rear shocks

- Service parts for Fox rear shocks

Fits damper-side on 34, 36, 40

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Volume Spacer tuning kits for FOX suspension fork service and repairs.

Original replacement stem hardware for your Allant+.

Features
- Allows for proper headset adjustment
- Required for safe operation