Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools

$9.99
White Lightning's Easy Clean Tire Brush is the perfect solution for cleaning dirty tires. It removes tread grit, which improves traction, helps to prevent flats, and minimizes the mess when storing or transporting your bike. The adjustable Easy Clean Tire Brush fits every shape and size of tire. You can also use it wet or dry, whether you just need to knock some dirt off or really get in there and give 'er a good scrubbing.

$13.50
Pusher for Wheels Mfg sealed bearing extractors. - For use with Wheels Mfg. 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function

$22.05
Receiver cup sleeve for Wheels Mfg. sealed bearing extractors. Machined aluminum sleeve, anodized red. - 1/2-inch thru hole to fit over their 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function

$23.63
Receiver cup for Wheels Mfg. sealed bearing extractors. Machined aluminum cup, anodized red with 60mm OD and 52mm ID. - 1/2-inch thru hole to fit over Wheels Mfg. 1/2-inch threaded rod press handles - This receiver cup is part of a system that requires additional pieces to function

$25.00
- Heavy duty double-ended steel lockring wrench
- 10.5" long for plenty of leverage
- Fits most bottom bracket lockrings

$26.25
The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125".
The gauge can measure:
- bottom bracket width
- bottom bracket shell inner diameter
- crank spindle length
- crank spindle diameter
- bearing inner diameter
Specifications:
Measures crank spindle diameters:
22mm, 24mm, 29mm, 30mm
Measures bearing inner diameters:
22mm, 24mm, 29mm, 30mm
Measures bottom bracket shell inner diameters:
37mm, 41mm, 42mm, 46mm
Measures bottom bracket shell widths:
61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm
Measures crank spindle lengths up to 180mm

$27.50
The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)

$35.00
- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings.
- Precision machined aluminum body.
- Anodized in Wheels MFG red.

$35.00
- Sealed bearing extractor with 1/2-inch thru hole for use with Wheels Mfg. 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function

$39.00
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups

$39.50
- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings.
- Precision machined aluminum body.
- Anodized in Wheels MFG red.

$39.50
- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings.
- Precision machined aluminum body.
- Anodized in Wheels MFG red.

$39.50
- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings.
- Precision machined aluminum body
- Anodized in Wheels MFG red.

$40.00
Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268

$62.50
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red

$70.00
The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers - (3) DS-2 narrow dropout savers

$75.00
- Essential bearing press for installation of bearings with a 10mm minimum ID
- (1) 3/8 ACME threaded rod, (2) 30mm standoffs, (2) threaded handles

$92.40
- Anodized aluminum construction. Includes mounting hardware - Measures the diameter of loose ball bearings - Measures the inner and outer diameter of cartridge bearings - Metric and Standard measurements

$115.00
Shock Bushing Press Kit
An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes.
- Fits 12mm and 1/2" bushings.
- Machined aluminum
- Anodized Red

$125.00
- Bottom bracket and bearing installation kit
- (1) 1/2" rod, (2) threaded handles
- (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

$187.00
The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the adjustable press stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings.
- machined aluminum handle and drifts
- red anodized drifts and handles
- zinc-plated 1/2" diameter threaded rod
- long threaded rod works with long head tubes up to 250mm includes
- 1 head tube drift includes
- 1 headset cup drift
- 1 adjustable press stop
- 1 threaded handle includes on 1/2"-13x17" unc threaded rod

$204.00
- Drift and over axle set for common thru axle hube and frame bearings
- For use with 3/8" press rod
- See wheelsmfg.com for full list of contents

$211.00
Complete tool kit for installing wheels manufacturing bottom brackets.
Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings:
- 22mm
- 24mm
- 29mm
- 30mm
Bottom bracket press pro install kit includes:
- UNC 48mm 16-notch socket x 1
- 22x37 drift 1/2" x 1
- 6806 OB 1/2" x 2
- 24x37 OB 1/2" x2
- 1/2" frame drift x 1 1/2-13 x 9. 7"
- threaded rod unc x 1 44-48. 5mm
- double 16-notch 1/2" socket x 1
- threaded handle x 2

$299.00
- Press set for common frame and through axle hub bearing sizes
- See wheelsmfg.com for full list of contents

$28.00
- Fits Truvativ ISIS bottom brackets with 8-notch flanged cups (also fits crank spider nut on older X-Flow and Stylo crankarms)
- CNC machined, heat treated steel construction
- 1/2" ratchet drive and 32mm wrench flat tool interfaces

$14.95
Topeak's Mini 6 is a great way to take along the essentials in a tidy and super-light package! Its forged-aluminum body includes: 2, 3, 4, 5 and 6mm Allen wrenches, and a Phillips screwdriver.

$14.95
Perfect for trailside repairs and for your home shop, Topeak's Universal Chain Tool is compatible with all chains and removes and installs pins with ease. Plus, there's even a compartment to hold spare pins, an integrated chain pin breaker and a removable chain hook to hold your chain while you work.

$17.95
Topeak's X-Tool+ is an in intelligently designed, 11-function folding multi-tool that can easily handle most mid-ride adjustments and repairs. Perfect for everyday cycling, its updated design secures an 8mm hex tool bit between the tool's sides, allowing for a tight-folding design with extra capabilities. Includes a T20 / 2.5mm L-type wrench that can also be used to tighten the hinge pins of the X-Tool.
- Allen wrenches: 2 / 2.5 / 3 / 4 / 5 / 6mm
- 8mm hex tool bit
- Torx wrench: T20 / T25
- #2 Phillips screwdriver
- Weight: 112g

$18.95
- Two sturdy tire levers also work as a chain master link tool to remove and install chains
- Includes a chain hook to make installation and removal easy
- Features a valve core tool as well as a place to store a spare quick link

$19.95
This lightweight, compact tool includes Torx sizes (T10/T15/T20/T25) to work on modern bike components while other popular tools, (1.5mm/2mm/3mm/4mm/5mm/Phillips), help with your repair or maintenance needs.
- Functions: 10
- Allen Wrenches 1.5 / 2 / 3 / 4 / 5 mm
- Torx Wrenches T10 / T15 / T20 / T25
- Screw Drivers #2 Phillips
Page 1 of 21
Next page