Filter By:
- Car Racks (102)
- Electronics (122)
- Eyewear (55)
- Fenders (118)
- Hydration (148)
- Indoor Cycling (35)
- Lighting (274)
- Locks/Security (168)
- Show More Categories
- Nutrition (23)
- Packs/Racks/Baskets (442)
- Pumps/Inflation (184)
- Safety (95)
- Storage (62)
- Tools/Maintenance (995)
- Other (123)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Accessories
$10.00
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
$65.95
Low-cost dual carrier with NEW Italian-made cages. Featuring 60% more grip force with an 8lb bottle grip. Includes 2 saddle mounts & 2 Xenon cages. Does not include bag.
- Dual bottle system tucks neatly behind your saddle for easy access to hydration
- NEW upgraded Italian-made, Xenon cages increase cage grip force by 60% over original model
- Mounts low to not hinder your ability to get on and off the bike
- First-time rear hydration system buyer? Mounts with a single screw for no-fuss install so you can self-install and quickly get on the road
Ideal for first-time rear hydration system buyers
- Ergonomically designed so you can easily access the bottle even with limited flexibility
- Adjust bottle height by up to 1" to perfectly position to your comfort level
Worry-free bottle security
- High-gripping Xenon cages tout an 8lbs grip force (approx) – within the ideal range of rear system grip force for worry-free bottle retention
Easy storage upgrades readily available
- Add an XLAB Mini Bag – a compact storage bag that sleekly mounts between the cages!
- Mini Bag easily fits all the essentials for a clincher repair kit – 1 tube, XLAB Air Strike CO2 cartridges, patch kit, XLAB inflator and tire levers
- Includes: 2 Mini Wing Cage mounting brackets and 2 XENON Cages
- Color: Silver mounting brackets with black cages
- Material: 6061-T6 Aluminum mounting brackets. Nylon composite cages.
- Cage Grip Force: 8lbs (3.6 kg) approx
- Weight: 186g
- Warranty: 3 Year Limited Warranty
$6.95 - $209.95
Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions, wet and dry
- Also works on other places of your bike, including hubs, cables, and jockey wheels
$7.95
- WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cycling specific applications
- Reduces friction on moving components while protecting them from contaminants, water, and corrosion
- Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to -180ºC) in all conditions
- Creates smooth, easy component movement for low energy loss
- Long-lasting lubrication for extended bearing and component life
- High resistance to oxidation and corrosion
- Can be used on steel, alloy, Carbon, and titanium
$7.95
- Perfect finishing touch to a bike built
- 7075-T6 aluminum
- M5 x 15mm
- 4Nm max torque
- For water bottle cages only.
- Never use these aluminum bolts in a structural application.
$12.95
- Some do it to protect that beautiful finish on their cranks, and some do it because they can't stand stock crankarm graphics.
- Whatever your reason for wrapping and protecting a crankset, we wanted to give you an option with our branding.
- These are full-wrap Crankskins that work with most cranksets
One pair
$12.95
- Stay hydrated and ride.
- These oversized 26oz capacity bottles are made and printed in the USA.
$19.95
Wolf Tooth Components, 8-Bit, Multi-Tools, Number of Tools: 3, Tire lever +Disc tool Add-On
$19.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on
$19.95
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved.
- Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment
- Designed to be easily flipped to provide either left or right hand bottle access
- Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset
- Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes
$19.95
EnCase System bit set contains:
- Spoke wrench
- Valve core wrench
- Flat head bit
- Phillips bit
- Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm
- Torx compatible sizes: T10, T25, T30
$19.95 - $34.95
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools.
- All inserts are 1 inch hex drive interface compatible
- Design and manufactured in Minneapolis, MN USA
- Nickel plated 4140 chromoly steel
$22.00
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm
- Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$24.95
B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items.
- Mounts to the B-Rad base mount (not included
$24.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle.
- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.
- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.
- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.
- Add on part to allow the Thru Axle Kit to be used on quick release bikes
$24.95
Wolf Tooth WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cycling-specific applications. It reduces friction on moving components while protecting them from contaminants, water, and corrosion. WT-G also prevents non-moving components from seizing together due to corrosion or galling. This is a grease that can be used on bottom brackets, hubs, headsets, general bicycle assembly, and more.
- Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to 180ºC) in all conditions
- Creates smooth, easy component movement for low energy loss
- Long-lasting lubrication for extended bearing and component life
- High resistance to oxidation and corrosion
- Can be used on steel, aluminum alloy, titanium, and carbon fiber.
Applications:
- hub bearings
- free hubs
- pedals
- headsets
- bottom brackets
- suspension pivots
- general assembly
$25.00
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Three slots for additional adjustments over the B-RAD 2 base
- Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$27.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Long, four-slotted mount allows two, smaller bottles to be mounted in-line
- Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$29.95
- Minimalist, lightweight multi-tool option stored at the end of an axle during rides for easy access during quick adjustments and trailside repairs.
- On one side of the handle is a 5mm hex end stepped to 6mm
- Compatible with Wolf Tooth rear axles that have threaded axle bolt (091000).
- Four double sided bits: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible
- Two double-sided hex bits can nest on the inside of the handle via magnet
$29.95
-Mminimalist, lightweight option to cover essential tool functions. It is stored at the end of an axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes
- On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for two double-sided hex bits that nest on the inside of the handle via magnet
- Compatible with Wolf Tooth axles that have threaded axle bolt
- Includes: Four bits: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible, hex adapter
$29.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.
- Mounts to bottle bosses, or to the B-Rad base for additional carrying options
- Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches)
- Cradle strap is 40mm wide and 350mm long for supporting loads
$29.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back.
- Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames)
- 6061-T6 aluminum brackets, stainless hardware
- Weight (no hardware) – 20g
- Maximum load 1700g
- Designed to carry two bottles or accessories off of one B-RAD base
$32.00
The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement.
- Hand-bent hollow tubing
- Fits any bike frame that has two standard bottle cage mounts with 64mm spacing
- Easily bent back in to shape if damaged
- Made by hand in Minnesota
$33.00
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool.
- Weight: 38.5g
- Size: 116 mm x 20 mm x 9 mm
- Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains
- Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$34.95
- The 8-Bit Tire Lever + Multi-Tools have two functions and can be nested with the 8-Bit Pack Pliers
- Multi-tools in the 8-Bit System attach to each other with magnets and short pins
- Plastic tire lever is compatible with tubed and tubeless tires
$34.95
Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail.
- Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately)
- Vibration-damping material and snug fit prevents rattling
- Durable precision-machined aluminum end caps
- Custom fit rubber flap can be trimmed to fit in smaller diameter bars
- Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
- Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
$44.95
Wolf Tooth B-RAD Tek-Lite Roll-Top Bags offer extra cargo space for carrying riding essentials on your frame. These bags are crafted from the lightweight, water-resistant, and durable Tek-Lite material, and have sealed seams that will protect bag contents from water, dirt, and other road/trail debris.
- Bags offer the capacity to carry multi-tools, small hand pump, spare tube, and/or snacks
- Can be attached under a saddle, strapped to a frame with silicone-lined straps, in a bottle cage, or onto any B-RAD Base
- Slim, streamlined design that will stay out of the way of cranks and pedaling legs
$44.95
This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move.
- Compatible with any cassette up to and including 12 speed cassettes
- Design and manufactured in Minneapolis, MN USA
- 7075-T6 Aluminum
Page 1 of 100
Next page